Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Impedence controlled signal

Status
Not open for further replies.
C

coolman1977

Newbie level 3
Joined
Nov 26, 2007
Messages
4
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,329
Hi all,

I had a question related to controlled impedence signals i.e

Depending on what parameter is the signals impedance values are standardized like all the USB differential pairs are routed using 90 Ohms impedance, DDR signals with 50 Ohms and differential signals with 100 E.
 

No, there is no single document that specifies what impedance all signals have to be. The ones you quote do come from the individual specifications for USB, DDR, etc. But at the same time, other signals are less tightly controlled in those same applications. For example, single ended USB signals can be between 45 and 80 ohms - so what you would use for your specific PCB design would depend on the chip manufacturer.

You have to look at the individual specifications for the type of device with which you are working, and also the chip manufacturer's data for the chipsets you are using.
 

As youd mentioned, USB single ended impedance is only roughly specified. That's cause it's rather uncritical (only used to transmit SE0), but it doesn't depend on the chip manufacturer, I thnk.
 

The recommended termination is up to the chip manufacturer within the boundaries of the standard. You would want to match your track impedance to the termination impedance. Therefore, you need to look at both the standards AND the manufacturer's datasheet.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top