Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

OPC server link to PLC

Status
Not open for further replies.

hn1

Advanced Member level 4
Joined
Oct 28, 2006
Messages
105
Helped
5
Reputation
10
Reaction score
0
Trophy points
1,296
Activity points
1,872
Dear all,

I want to set up a link between PLC and Matlab/Simulink or Labview. I searched for the link and I found the OPC server solution. I have a RSLinx Lite software from Rockwell. I wonder if I can use it as an OPC server?

Thanks,
 

OPC server is an software installed in PC and that PC will connected to your PLC through network or cable. And this software can support your PLC. You can consider to Matricon, Kepware OPC server.
 

there is a great example in Ni.com about this connection of OPC servers to your PLC
just go to webcasts in Ni.com and search for opc server with kepware im sure you will find it.i just saw it and it blew my mind off
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top