Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Physical implementation of Matlab simulink model

Status
Not open for further replies.
S

sumi84

Newbie level 3
Joined
Apr 5, 2008
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,316
Hi!
I have simulated an OFDM communication model in simulink and I have used an AWGN channel to simulate the wireless media.
Now I would like to implement this model in real world and I'm planing to transmit the signal, generated by MATLAB, through external hardware unit/s.
But the problem is that i don't know how to physically transmit the MATLAB generated signal through air. And how to receive the transmitted signal from the receiving end hardware, back to the MATLAB simulink model for further signal processing.
I would be grateful if someone could help me on this matter.
Thank you.
 

do you mean you want to implement it, for instance on FPGA, then make some measurements to test if your system is working ok or not?!
 

Hi,

You may use C6713 DSK for real time implementation.

Regards
 

it will be better to test available signal in MATLAB for algorithm validation.if ur algorithm is correct and all simulink blocks are synthesizable download in supported board and test for real time signal
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top