yumian
Newbie level 1
ptm model
Hi,
I'm trying to use PTM models downloaded from **broken link removed** in spectre. However, I got syntax error while simulating. Does anybody can tell what kind of modification should be made to the model file.
Thank you a lot!
The error message is like:
" 90nm_bulk.pm" :40 syntax error in specification of 'tnom' "
The following is the begging of my model file:
* Beta Version released on 2/22/06
* PTM 90nm NMOS
simulator lang=spice insensitive=yes
.model nmos nmos level = 14 *(I changed the level from 54 to 14 here)
+version = 4.0 binunit = 1 paramchk= 1 mobmod = 0
+capmod = 2 igcmod = 1 igbmod = 1 geomod = 1
+diomod = 1 rdsmod = 0 rbodymod= 1 rgatemod= 1
+permod = 1 acnqsmod= 0 trnqsmod= 0
+tnom = 27 toxe = 2.05e-9 toxp = 1.4e-9 toxm = 2.05e-9
+dtox = 0.65e-9 epsrox = 3.9 wint = 5e-009 lint = 7.5e-009
+ll = 0 wl = 0 lln = 1 wln = 1
+lw = 0 ww = 0 lwn = 1 wwn = 1
+lwl = 0 wwl = 0 xpart = 0 toxref = 2.05e-9
+xl = -40e-9
Hi,
I'm trying to use PTM models downloaded from **broken link removed** in spectre. However, I got syntax error while simulating. Does anybody can tell what kind of modification should be made to the model file.
Thank you a lot!
The error message is like:
" 90nm_bulk.pm" :40 syntax error in specification of 'tnom' "
The following is the begging of my model file:
* Beta Version released on 2/22/06
* PTM 90nm NMOS
simulator lang=spice insensitive=yes
.model nmos nmos level = 14 *(I changed the level from 54 to 14 here)
+version = 4.0 binunit = 1 paramchk= 1 mobmod = 0
+capmod = 2 igcmod = 1 igbmod = 1 geomod = 1
+diomod = 1 rdsmod = 0 rbodymod= 1 rgatemod= 1
+permod = 1 acnqsmod= 0 trnqsmod= 0
+tnom = 27 toxe = 2.05e-9 toxp = 1.4e-9 toxm = 2.05e-9
+dtox = 0.65e-9 epsrox = 3.9 wint = 5e-009 lint = 7.5e-009
+ll = 0 wl = 0 lln = 1 wln = 1
+lw = 0 ww = 0 lwn = 1 wwn = 1
+lwl = 0 wwl = 0 xpart = 0 toxref = 2.05e-9
+xl = -40e-9
