Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need confirmation regarding HFSS

Status
Not open for further replies.
W

wlcsp

Full Member level 3
Joined
Aug 16, 2004
Messages
184
Helped
22
Reputation
44
Reaction score
10
Trophy points
1,298
Activity points
1,511
Dear all,

I notice several things in HFSS. Please confirm when you ever noticed the same:
1. The convergence profile/curve is not the same when change the sweep method e.g. fast sweep or interpolation. Although, all other parameters remain the same.
2. Interpolation sweep works better over a broadband frequencies.

thanks.
 

There are 3 sweep methods, Discrete, Fast, and Interpolating.

Discrete will always give you the most accurate results. It also takes the most time. I usually always use Discrete Sweeps.

The HFSS Help menu talks about the different types.

For most of my applications the time needed for a discrete sweep is not much more then for the fast or interpolating sweep, so i don't use them too often.

If you can, use discrete sweeps.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top