Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

looking for circuit diagram for 27mhz, 40mhz, or 49 mhz RC

Status
Not open for further replies.
T

teekay_tk

Junior Member level 1
Joined
May 11, 2007
Messages
16
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,281
Activity points
1,372
circuit diagram of rc helicopter

Hi
I am trying to make my own transmitter that should work with 40MHZ OOK reciever for RC helicopter. I have found this circuit from net.
https://www.webx.dk/rc/xtwin/convert17012006.gif

but i dont understand this well or how to conver it to 40mhz.
can some one point me to a nice circuit for 40mhz band transmitter.
input to the transmitter is a digital PCM scheme

thanks
 

rc helicopter circuit diagram

This is a VERY basic transmitter for OOK but it will probably work despite it's limited capabilities (output power, frequency agility, modulation). Replace the 27.145 MHz crystal with the wanted 40 MHz frequency (if you can find one), perhaps tweak some values for frequency tweaking and you're off to go.
 

    T

    teekay_tk

    Points: 2
    Helpful Answer Positive Rating
scheme transmitter 49mhz

thanks radio head. can you explain to me the two inputs B3 and B2 pins on the micro. As far as i can understand, PCM PWM both require only one digital input (i.e the data stream). so what is the other input for?


thanks
 

40mhz am transmitter circuit

ok thanks
I understand it better now. The other line is just to turn the modulator on / off
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top