Catalyst
Full Member level 3
Hello Everyone,
I am trying to model a 6 turn spiral inductor (rectangular) in an air box. I was wondering if anyone could have a look at it and see why I am getting no value for the structures inductance and very little resistance.
Predicted Values from using other s/w / experimental:
Inductance at 1 MHz should be around 730 nH
Resistance at 1 Mhz should be around 0.2 Ohms
I have excited it using a lumped port.
I have attached the HFSS file. Any advice is much appreciated
Cat
I am trying to model a 6 turn spiral inductor (rectangular) in an air box. I was wondering if anyone could have a look at it and see why I am getting no value for the structures inductance and very little resistance.
Predicted Values from using other s/w / experimental:
Inductance at 1 MHz should be around 730 nH
Resistance at 1 Mhz should be around 0.2 Ohms
I have excited it using a lumped port.
I have attached the HFSS file. Any advice is much appreciated
Cat