Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Why there are only 13 channels in WLAN802.11b(WiFi)?

Status
Not open for further replies.
vivek1214

vivek1214

Full Member level 1
Joined
Jun 18, 2007
Messages
99
Helped
11
Reputation
22
Reaction score
1
Trophy points
1,288
Activity points
1,824
Why there are only 13 channels in WLAN802.11b(WiFi) although frequency range is 2.40-2.4835GHz, Bw is 22MHz with 5GHz spacing?
if the space is 5MHz and BW is 22Mhz then thre will be overlaping of channels?
 

Re: about 802.11b WLAN

Hi , yes tehre is overlapping but , practically in a network we use only the channels that are sufficiently spaced to avoid overlapping.

so only few channels ( about three but I am not sure) could be used simultaneusly in a Wlan.
 

about 802.11b WLAN

See:

http://www.wi-fiplanet.com/tutorials/article.php/972261

http://en.wikipedia.org/wiki/List_of_WLAN_channels

http://www.3com.com/other/pdfs/infra/corpinfo/en_US/50307201.pdf

http://www.extremetech.com/article2/0,1558,1152281,00.asp

The Cirond paper mentioned in the last link deals with some
overlapping using 4 channels instead of 3 channels (non-
overlapping). Very interesting since use a spreadsheet
for the calculation of interference due to overlapping
channels....Google it if interested.
 

    vivek1214

    vivek1214

    Points: 2
    Helpful Answer Positive Rating
Re: about 802.11b WLAN

thanks for reply
but in a only 5MHz spacing, how they accomodate 22 MHz BW channels?
 

Re: about 802.11b WLAN

I think you will see how here:
**broken link removed**
**broken link removed**


Also for more information:

https://www.cisco.com/en/US/docs/wi...ag/admin/1.0/administration/guide/auappb.html


As an example, for channels 1 and 2(see fig.) the separation
between the center frequencies are 2417-2412 = 5 MHz. Your
confusion is "How would be a separation less than the channel
bandwidth?", right.? The figure answer that.

In reality for the 2.4GHz ISM band the whole banwidth ~ 82 MHz
only accomodate three channels NON-OVERLAPPING of 22 MHz.
 

    vivek1214

    vivek1214

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top