Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Good tool for verilog-a simulation.

Status
Not open for further replies.
G

gaom9

Full Member level 4
Joined
Oct 8, 2007
Messages
228
Helped
7
Reputation
14
Reaction score
5
Trophy points
1,298
Location
China
Activity points
3,294
modelwriter cadence

I find modelwriter of cadence is very useful for verilog-a simulation.
I can produce lots of blocks of analog circuit automatically, such as adc, dac, ota, peak detector, VCO, PLL, and so on.
And the parameters of all blocks can be set as we like. And then use spectre to simulate.
It is quite useful. Recommend it to you.

And the detail of it is as follow.


Best regards!
 

peak detector verilog-a

should this tool be installed? I can not find it on my spectre when creating new cellview.

Thanks in advance.
 

The version of my cadence is IC5141, and when I create new cellview, I choose the modelwriter tool.
And you can follow the cadence modelwriter guide above to start it.

Or is your cadence version too old, so it does not contain this function.

Best regards!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top