---
+ Post New Thread
Results 1 to 5 of 5
  1. #1
    Newbie level 5
    Points: 888, Level: 6

    Join Date
    Mar 2008
    Posts
    8
    Helped
    0 / 0
    Points
    888
    Level
    6

    What is a race-around problem ?

    wat is race - around problem??how it can be overcome??

    •   Alt11th March 2008, 11:41

      advertising

        
       

  2. #2
    Member level 3
    Points: 1,947, Level: 10
    jossion's Avatar
    Join Date
    Oct 2005
    Location
    India
    Posts
    60
    Helped
    5 / 5
    Points
    1,947
    Level
    10

    race around condition in flip flops

    Race around problem is unwanted and uncontrollable oscillations occuring in level trigerred JK flipflop due to a feedback from output to input. It is overcome by master-slave configuration, edge triggering etc.


    1 members found this post helpful.

    •   Alt11th March 2008, 11:50

      advertising

        
       

  3. #3
    Member level 5
    Points: 2,046, Level: 10

    Join Date
    Jan 2008
    Location
    bangalore
    Posts
    90
    Helped
    6 / 6
    Points
    2,046
    Level
    10

    what is race around problem

    in jk latch, the output is feedback to the input, and therefore change in the output causes the change in inputs. due to this in the postive half of the clock pulse if j and k both are high then the output toggles simultaneously. this condition is known as race around condition.

    to overcome this problem we should use master slave ff.


    1 members found this post helpful.

    •   Alt11th March 2008, 12:02

      advertising

        
       

  4. #4
    pra
    pra is offline
    Member level 5
    Points: 2,185, Level: 10

    Join Date
    Jan 2005
    Posts
    85
    Helped
    10 / 10
    Points
    2,185
    Level
    10

    what is the race-around pbroblem

    r u asking abt race around problem in flip flop or in the code u r writing?

    if its a flipflop then the above answers r correct...

    if its in the code, u will get the race condition, when the variable value is the changing at a same time by two different tasks and the result value of that variable is undefined ..



  5. #5
    Junior Member level 2
    Points: 970, Level: 7

    Join Date
    Mar 2008
    Posts
    22
    Helped
    2 / 2
    Points
    970
    Level
    7

    race around condition jk flip flop

    In JK flip flop we provide feedback path sometimes both the inputs are high which gives Erroneous state.Or we can say A condition in logic network in which the difference in propagation times through two or more signal paths in the network can produce an erroneous output.This can be removed by using Master slave Flip flop.



+ Post New Thread
Please login