Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to do partition with only netlist?

Status
Not open for further replies.
P

prithivikumars

Member level 2
Joined
Jul 13, 2004
Messages
42
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
264
hi all,


If I have only netlist, how to do partition?
 

regarding partition

Do you mean partition in the physical design tool or how to partition the netlist itself?
 

Re: regarding partition

Hi,

I wants the partition using PD tool.
 

regarding partition

In SOC Encounter there are a series of commands to accomplish this, which partition the design along module boundaries. I'm pretty sure other tools do the same. The procedure is in the users guide.
 

regarding partition

Partition is not an easy job....If the person is having 5 yrs of experience also he can't say exactly I mean he should have atleast 8to 10 yrs of experience then only he can.............In this there will be so many constraints which we have to look...

Bye take care
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top