Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Modifying differential signals in Altium

Status
Not open for further replies.
M

maxascent

Member level 2
Joined
Sep 22, 2005
Messages
52
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Location
England
Activity points
1,631
Hi

I have some differential pairs in Altium Designer that I would like to modify. Is there an easy way to change the track size and spacing once they have been routed?

Thanks
 

You will have to reroute the differential pair with the new rules for width and spacing. If you have loop removal turned on, the old tracks will automatically be removed when you place the new pair.

You could easily change the track width using the Inspector Panel, but there's no way to change the spacing automatically. That has to be done manually. The easiest way is to rerout the pair with loop removal on.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top