+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Newbie level 5
    Points: 1,091, Level: 7

    Join Date
    Feb 2007
    Posts
    9
    Helped
    0 / 0
    Points
    1,091
    Level
    7

    How to do PCB EMI/EMC simulation using CST Microwave?

    Hi All,
    Can any one plz guide me how to conduct PCB EMI/EMC simulatyion using CST Microwave studio.I too need some basics o EMI/EMC of PCB simulation.
    Regards,
    Bibhu

    •   Alt4th February 2008, 16:54

      advertising

        
       

  2. #2
    Member level 1
    Points: 1,718, Level: 9

    Join Date
    Feb 2006
    Posts
    38
    Helped
    13 / 13
    Points
    1,718
    Level
    9

    Re: Hi

    Bibhu

    take a look here

    http://www.cst.com/Content/Applicati...ower+Integrity

    basically this PCB simulation is challenging, due to the extreme complexity of the boards and all (connectors, vias, etc). You got to get the board imported into CST MWS by means of a CAD format (Gerber, DXF, etc). Then assign the ports, etc.

    As a guideline, frequency domain solver for multi-port boards, time domain for huge structures and when an arbitrary input signal is needed (like rectangular pulses).

    I hope it helps!



    •   Alt16th February 2008, 12:31

      advertising

        
       

  3. #3
    Newbie level 4
    Points: 888, Level: 6

    Join Date
    Jan 2008
    Posts
    6
    Helped
    0 / 0
    Points
    888
    Level
    6

    Re: Hi

    wow. thanks you for the link



--[[ ]]--