Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS phase and amplitude radiation maps?

Status
Not open for further replies.
H

hughrpg

Newbie level 5
Joined
Jan 23, 2008
Messages
8
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,361
Using HFSS 9.2.1 having dificulty generating data table for a radiation plot,
in amplitude and phase, so I can use the data with another programme.
The in-built calculator seems very poorly documented. Advice or pre-worked
example would be very helpful!

2nd Question: If I simulate an antenna, can I get a fitted phase center, or
must I do this myself from the amplitude and phase data (see 1st paragraph)
Thanks.
 

If I wanted to determine the phase center I would try to plot a near field phase front and use the curvature to define a phase center. I have not tried it myself and would be interested to know how the effort works out.

I do not know of a post-processor feature in HFSS for that evaluation.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top