Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to control the motor speed in 555 timer pwm?

Status
Not open for further replies.

faraz101

Full Member level 1
Joined
Mar 7, 2007
Messages
96
Helped
7
Reputation
14
Reaction score
5
Trophy points
1,288
Activity points
1,872
i have build 555 timer pwm circuit and i am varying the motor speed with the variblre resistor b/w pin 7 and 6.but i want to control the speed form external analog voltages which ranges form 0.80v to 1.20v.
any ideas
thanx
 

pwm 555

the control pin5 can be used but a amplified version of the 0.8 to 1.2V signal would be needed as far as i know....
 
555 timer pwm circuit

i already work on it but it is not giving a wide speed range.coz pin5 already have some voltage about 3v.
thanx 4 reply
 

555 pwm

you can connect a resistor to ground to reduce the voltage on pin5 .

i worked on it a long time ago and i used a transistor circuit to pull th evoltage at pin5 to ground and it did work well

cheers
 

555 pwm circuit

pin5 will have a voltage because it is part of a internal voltage divider.... it can be varied externally according to our need....
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top