Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Which output topology is appreciate? class A or class AB ?

Status
Not open for further replies.

haoyun

Junior Member level 3
Joined
Oct 10, 2005
Messages
28
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,473
Hi, anyone can answer to me,

Which output topology is appreciate? class A or class AB ?

RL=10KOhm, f(unit gain frequency)=400MHz

Thanks!

Added after 1 minutes:

Cl=1pF
 

Re: Which output topology is appreciate? class A or class AB

Why not use an op amp, since you only want unity gain and your load is not big plus its just a lot simpler to build and test.
 

Re: Which output topology is appreciate? class A or class AB

in effiecient point of view classs AB(>50%) is suitable than class A(=50%)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top