Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
In eagle if you just name the nets.
Click on the resistor icon with R2 highlighted (and then the wire/net) and give your net a name. If you give subsequent nets the same name you will be prompted to join the nets.
To display the names of the nets on your schematic click on the label icon (picture of a net with ABC above it) and then on the net you want to display the name of. The frames library has ports of varying size you can use for neatness.
In eagle if you just name the nets.
Click on the resistor icon with R2 highlighted (and then the wire/net) and give your net a name. If you give subsequent nets the same name you will be prompted to join the nets.
To display the names of the nets on your schematic click on the label icon (picture of a net with ABC above it) and then on the net you want to display the name of. The frames library has ports of varying size you can use for neatness.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
