Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to add shorting pin in IE3D

Status
Not open for further replies.
M

micro_tech

Member level 1
Joined
Jul 22, 2007
Messages
34
Helped
5
Reputation
10
Reaction score
0
Trophy points
1,286
Activity points
1,558
shorting pin in ie3d

Hi,

Can anyone please give me a hint to add shorting pin in IE3D (MGrid) for microstrip antenna...?

thanx
 

ie3d shorting pin

Hi,

Add vertices where u want to short .select those vertices and with the help of Adv edit-> Buid via connecting edges or in case buid via through selected polygons u can able short it.
 

Hi balaguru thavamani,

Thanks for your reply...
Before, I done the shorting of patch antenna by using the "Conical via"...
Is it the same (I mean in the results)?
And for the diameter of shorting pin actually how much it is (which also used in practical)?

Regards
 

Hi,

Normally in Printed Antennas circular via (PTH) will be used.

and in case of dia it depends up on the frequency of operation and size of the

antenna.
 

Hi:

If you are building ribbon vias between edges on 2 different layers, you can use Adv Edit->Build Via Connection... If you want to build solid vias, you can use ENTITY->CONICAL VIA. You can also build the shape of the via as a polygon on a layer. Then, you select it and use Adv Edit->Build Holes and Vias from Selected Polygons. If they shape are the same, they should yield the same results.

best regards,
 

    M

    micro_tech

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top