Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with running Microsim Pspice which uses a security plug on a port

Status
Not open for further replies.
K

khanrising

Newbie level 4
Joined
Jul 25, 2007
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,323
Hello,

I have a new computer which does not have a parallel port.
I need to run Microsim Pspice which uses a security plug on that port.
I bought a parallel port card and plugged it in but it didn't work cause
the card only emulates the port and Pspice plug needs a fixed address.

Does anyone know how I can get around this problem?
Is there a card out there that does have a fixed address?

Thanks for any help.
 

Re: Microsim Pspice

The security plug was probably manufactured by a different company. Try to find out this company from any markings on the security plug. They will give you advice on which adapter to use. I had similar problems on another program for the macintosh and the plug manufacturer told me which specific adapter to buy and it worked.
 

Re: Microsim Pspice

Thanks! I'll give it a try.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top