Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is the use of grid size?

Status
Not open for further replies.

mujju433

Full Member level 3
Joined
Jun 2, 2007
Messages
174
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
2,293
What is the use of grid size??
What is the diference between routing grid adn manufacturing grid ??
I will be grateful to u if anybody can explain me about this plz
Bye take care
 

Re: doubts on grid

The grid helps you to obtain a better/regular placement and routing. For example, if you wouldn't have the grid, you could route at any distance from the next route, allowing you to place the track on the top of the other track. During the routing you can use any grid you want, but take care because the pick & place machines that equip the boards have a certain granularity of the placement, and the PCB manufacturers also have a minimum distance between the tracks. You should check this with your manufacturer.
 

Re: doubts on grid

How do I decide the grid size for my design?

Added after 1 minutes:

x_zoli said:
The grid helps you to obtain a better/regular placement and routing. For example, if you wouldn't have the grid, you could route at any distance from the next route, allowing you to place the track on the top of the other track. During the routing you can use any grid you want, but take care because the pick & place machines that equip the boards have a certain granularity of the placement, and the PCB manufacturers also have a minimum distance between the tracks. You should check this with your manufacturer.


Hi can u please tell me how can we decide the size of grid for a design?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top