Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to build a perfect square wave in cadence or spectre?

Status
Not open for further replies.
J

Julian18

Full Member level 3
Joined
Apr 9, 2007
Messages
167
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Activity points
2,389
Hi there,
I want to build a perfect square wave using spectre, but vpulse imposes that rise and fall time must not be zero , So how to build a perfect square wave??

Thanks


Julian
 

Do you have a specific application?
If not,just set the rise/fall time as small as you wish...
 

Re: how to build a perfect square wave in cadence or spectre

Julian18 said:
Hi there,
I want to build a perfect square wave using spectre, but vpulse imposes that rise and fall time must not be zero , So how to build a perfect square wave??

Thanks


Julian
Click to expand...

U can never build a square wave with zero rise and fall time, if u want a perfect square wave u have to choose rise and fall time that is negligible in comparison to ur period but u can never set them to zero
 

do you have a "real life application" where rise & fall time are 0???
 

Re: how to build a perfect square wave in cadence or spectre

simply set rise and fall times to a very small value ( 1/1000 or 1/10000 ) of ur pulse width
 

Re: how to build a perfect square wave in cadence or spectre

Julian18 said:
Hi there,
I want to build a perfect square wave using spectre, but vpulse imposes that rise and fall time must not be zero , So how to build a perfect square wave??

Thanks


Julian
Click to expand...

What is that for? Nothing is 100% perfect

But, you may use a very very small rise/fall time
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top