Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

open n closed circuit

Status
Not open for further replies.

mohsin3069

Newbie level 6
Joined
Apr 5, 2007
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,358
what is mean by an open n closed circuit???
 

An open circuit is one that has no path for current

Added after 54 seconds:

A closed circuit is one that has a complete path for current
 

    mohsin3069

    Points: 2
    Helpful Answer Positive Rating
is just like a bridge broken from the center so that the trafic cannot flow simillarly in an open circuit the cuurent cannot flow and vic versa for closed circuit

or we can also say that

open circuit= infinite resistance
closed circuit=zero resistace(short.!)
 

    mohsin3069

    Points: 2
    Helpful Answer Positive Rating
A closed circuit is one that has a complete path for current
open circuit= infinite resistance
closed circuit=zero resistace(short.!)
 

    mohsin3069

    Points: 2
    Helpful Answer Positive Rating
But, physically, there is neither absolute open nor absolute closed circuit.
 

    mohsin3069

    Points: 2
    Helpful Answer Positive Rating
open circuit means high resistance (ideally infinity)between them and closed circuit means very low(ideally zero) resistance.
 

    mohsin3069

    Points: 2
    Helpful Answer Positive Rating
Hi,

Open Circuit (OC) means no return path for the current and infinity resistance, while short circuit (SC) means there is a rturn path for the current and if there are no other resistances present then it shows zero (practically very low) resistance.

BR,

Arif Khan
 

    mohsin3069

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top