Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

The saber modelsim cosimulation error

Status
Not open for further replies.

juliano_katrib

Newbie level 1
Joined
Mar 8, 2007
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
hello i am workig on the saber modelsim cosimulation but when i begin simulating he gives me that errors in the transcript
dctr(siglist /...,stepsize fixed,tend 1m,tsmax 25u,tsmin 1u,tstep 10u
*** ERROR "ICERR_NO_SIMULATION" *** The foreign simulator returns command
prompt without simulating.
dctr(siglist /...,stepsize fixed,tend 1m,tsmax 25u,tsmin 1u,tstep 10u
|
>
dctr(siglist /...,stepsize fixed,tend 1m,tsmax 25u,tsmin 1u,tstep 10u
*** ERROR "ICERR_EXITED" *** The partner simulator exited unexpectedly.
dctr(siglist /...,stepsize fixed,tend 1m,tsmax 25u,tsmin 1u,tstep 10u
|

thank you
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top