Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to integrate IP core in a design in Altera FPGA kit using Quartus II?

Status
Not open for further replies.
V

vsrpkumar

Member level 4
Joined
Mar 26, 2006
Messages
74
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,830
Hi
I have one doubt.we are developing a big core in our company.A small IP core is brought from other company.I have to test the dsign in FPGA.how to integrate that ipcore in ours design in altera FPGA kit using quartus-II software.
Thanking you
 

Re: Hi

First try out simulating the design. if u get test bench.
After that u connect the IP core to ur processor design and port into fpga.

Is the board available for the IP. the inputs and outputs.
then u connect it to some logic and see how u can drive inputs from external world and check the output.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top