Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

-10 volts voltage regulator IC

Status
Not open for further replies.
E

Electronica

Advanced Member level 4
Joined
Jul 17, 2006
Messages
119
Helped
10
Reputation
20
Reaction score
3
Trophy points
1,298
Activity points
1,739
plz tell me any -10v fixed negative voltage regulator IC
 

79xx series give negative fixed voltages

......xx stands for d voltage u desire

u will get datasheets by simply searching google
 
hi
as for the series 79xx it is for definte voltages and you don t determine it as far as I remember 10 volt is not included.
 

As fixed negative 10V voltage regulators are not available you can use the LM7908 (-8V) voltage regulator and add 2.1V zener diode between its COM pin and 0V .. see picture below ..
However, if you can get hands on the LM337 adjustable voltage regulator - with only 2 external resistors - you will be better off than with the LM7908+2.1V zener ..

Regards,
IanP
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top