Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Schematic...Circuit Diagram for USB-to-USB PC connection

Status
Not open for further replies.

xischaune

Full Member level 1
Joined
Mar 8, 2006
Messages
98
Helped
12
Reputation
24
Reaction score
4
Trophy points
1,288
Activity points
2,123
usb circuit diagram

Hi all...
does any one have any circuit diagram/schematics for connecting two PCs through USB port...
Thanx in advance...
 

circuit diagram of usb

Hi,
interconnection between two PC's via USB is based on TCP/IP. It's not ordinary wiring. And available products are very slow, about 6Mbit/s. Theoreticaly it could be possible e.g with two PIC 18F4550 and using parallel. But this is madness, I think.

This is only one complete solution which i have found:
**broken link removed**

Datasheet:
**broken link removed**
 

18f4550 pc connection via usb software

is probably better to use ethernet instead
 

circuit for usb ethernet adapter

Use ethernet.
 

18f4550 usb ethernet

Plesa said:
Theoreticaly it could be possible e.g with two PIC 18F4550 and using parallel.
... or two FTDI USB-to-UART chips.

Plesa said:
But this is madness, I think.
This is not necessarily madness. Such device can be used to simulate a USB device, which doesn't yet exist, with a PC.
 

diagram of usb ethernet connections

Helloooo..

About your question, USB host to host communication.
Take a look at these possible solutions.

https://www.usbgear.com/item_100.html
# USB host to host communication
# High-speed data transfer rate up to 8Mbps max
Price= $28.90

https://www.usbgear.com/item_143.html
# USB host to host communication
# TCP/IP ,NetBEUI, IPX/SPX
# Maximum Data transfer rate: Over 5 Mbps.
# Construct USB Network up to 17 PCs
Price=$39.50

And 3rd, in case one of your PC has an Ethernet port.
https://www.usbgear.com/item_130.html
The USBG-110T USB Ethernet Adapter provides an easy way to connect a USB-enabled desktop or laptop PC to a 10/100BaseT Ethernet LAN. It comes with an attached USB cable that has a type A plug for standard USB connection to PC's USB
Price=$33.50

Hope that helps.

JR
 

usb to uart circuit diagram

The problem with USB is the software and the drivers. With ethernet, you can use simple TCP/IP based software that every PC has.
 

usb ethernet adapter schematic

How i use MC68hc908JB8(Usb moto) ?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top