Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
For a 2 input nor gate,there are 4 possible combinations,so we can implement it using 4 x 1 multiplexer.The two inputs A and B are given to the mux as selection inputs and keeping enable signal high.
Now for 2 input nor gate the output will be 1 when all inputs are 0.,thus we will connect Vcc to I0 and ground to I1,I2 and I3.
Hi p_shinde
Look what a nor gate does.Assume A and B are inputs.
If B zero it passes the (A complement) to output.
if B is one then output is '0'.
Now connect B to select
A' to LSB input
and logic 1 to MSB input
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.