Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Cascaded Lag Filter Order

Status
Not open for further replies.

Kral

Advanced Member level 4
Joined
Mar 28, 2005
Messages
1,319
Helped
280
Reputation
558
Reaction score
84
Trophy points
1,328
Location
USA
Activity points
13,401
Anybody know of a closed form formula for calculating the required filter order n and corner frequency for cascaded analog lag filters meeting a required passband and stopband specification? I realize that cascaded lags are usually a poor choice of filter type, compared with Butterworth, Chebyshev, elliptic, Bessel, etc.
~
Example:
~
For 5rad/sec in the passband, the Gain must be >= .99, and for 43 rad/sec in the stopband, the gain must be <= than 0.002.Given thes specs, what must the filter order n and the corner frequency fc of each section be? The formula should be able to compute these two parameters directly from the filter specs.
Thanks,
Kral
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top