Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to run post-layout simulation in spectre gui?

Status
Not open for further replies.
H

holddreams

Full Member level 6
Joined
Aug 2, 2005
Messages
351
Helped
15
Reputation
30
Reaction score
7
Trophy points
1,298
Location
Shanghai
Activity points
4,237
how to do post layout simulation in spectre

I have extract a RC netlist in hspice mode. Can I use spectre to simulate?

If spectre can do ,the netlist should be conver to spectre mode,right?


How to run post-layout simulation in spectre gui?

Thanks.
 

post layout simulation hspice

you can't run hspice directly with spectre.
you should change hspice netlist to spectre netlist firstly

you can directly extract RC netlist from layout on spectre mode with proper tool.
 

spectre post-layout simulation

I convert the hspice netlist to spectre format,
and use spectre gui to simulate ,it seems good.
 

how to convert hspice netlist ot spectre format?
I am a newer, I am sorry to ask you such problem.^_^
 

In cadence, you can set up a config view to simulation RC effect, it support spice netlist, extracted view etc
 

U can use the hierarchy editor
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top