walters
Advanced Member level 2
How do i set the Volts per Divisions on the oscilloscope on it will read the "period"
( one cycle ) for each of these frequency with the periodic time?
10hz=100ms
What should the volts per division be set to on the oscilloscope?
to display the period and it will be 100ms?
20hz=50ms
What should the volts per division be set to on the oscilloscope?
to display the period and it will be 50ms?
50hz=20ms
What should the volts per division be set to on the oscilloscope?
to display the period and it will be 20ms?
100hz=10ms
What should the volts per division be set to on the oscilloscope?
to display the period and it will be 10ms?
200hz=5ms
What should the volts per division be set to on the oscilloscope?
to display the period and it will be 5ms?
300hz 3.33ms
400hz 2.5ms
500hz 2ms
600hz 1.67ms
700hz 1.42ms
800hz 1.25ms
900hz 1.11ms
1Khz 1ms
2Khz 0.5ms
3Khz 0.3ms
4Khz 0.25ms
5Khz 0.2ms
( one cycle ) for each of these frequency with the periodic time?
10hz=100ms
What should the volts per division be set to on the oscilloscope?
to display the period and it will be 100ms?
20hz=50ms
What should the volts per division be set to on the oscilloscope?
to display the period and it will be 50ms?
50hz=20ms
What should the volts per division be set to on the oscilloscope?
to display the period and it will be 20ms?
100hz=10ms
What should the volts per division be set to on the oscilloscope?
to display the period and it will be 10ms?
200hz=5ms
What should the volts per division be set to on the oscilloscope?
to display the period and it will be 5ms?
300hz 3.33ms
400hz 2.5ms
500hz 2ms
600hz 1.67ms
700hz 1.42ms
800hz 1.25ms
900hz 1.11ms
1Khz 1ms
2Khz 0.5ms
3Khz 0.3ms
4Khz 0.25ms
5Khz 0.2ms