Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

The output resistance of the MOSFET ?

Status
Not open for further replies.
L

Learn2Fly

Junior Member level 3
Joined
Apr 26, 2005
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,534
Hi,

As is well known from the textbook that the small signal output resistance (rout) of the MOSFET (common source) is approximately equal to r0 which is in the order of tens of KΩ. However, when I simulated the output resistance by S-Parmeter, it turned out to be only about 100Ω!! I tried several different models, the results are almost the same!! This is interesting, but why??


Thank you.
 

You should take into account Drain-to-source parasitic capacitor, it's about ~2-20pF. At high frequency, This parasitic cap is dominant , instead of r0 output resistance.
 

happy2005 said:
You should take into account Drain-to-source parasitic capacitor, it's about ~2-20pF. At high frequency, This parasitic cap is dominant , instead of r0 output resistance.
Click to expand...

Hi,

Thanks for your reply. But the truth is even when simulated at a 1KHz frequency, the output resistance is still less than 2KΩ. werid ...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top