Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Effect of high temperature on cntfet

Status
Not open for further replies.

tejashrimane

Newbie level 2
Joined
Nov 21, 2017
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
21
hello i am working cntfet i want to investigate efeect of diiferent temperature on drain current but when i change temperature there is no effect on its same for all temp
i am using standford university model of cntfet.

Code:
********************************************************************
* Carbon Nanotube Field Effect Transistors
*             HSPICE Model
*	       Version 2.2.1
*
*   
*   Copyright The Board Trustees of the Leland Stanford Junior University 2009
*   Albert Lin, Gordon Wan, Jie Deng, Prof. H-S Philip Wong
*   All Rights Reserved.
*
*   09/09/2008 Last Modified by Albert Lin.
*
*   Carbon Nanotube Field Effect Transistors Verilog-A implementation
*   based on 
*   "A Circuit-Compatible SPICE model for Enhancement Mode Carbon 
*   Nanotube Field Effect Transistors" by Jie Deng and H-S Philip Wong 
*
*   Patent Pending.
*   
*   File name: cnfet_sample.sp
********************************************************************

********************************************************************
* LICENSE AGREEMENT
* Stanford Leland Junior University and the authors ("Stanford") 
* provide these model files to you subject to the License Agreement, 
* which may be updated by us from time to time without notice to you. 
* The most-up-to-date License Agreement can be found at
* **broken link removed**
********************************************************************


***************************************************
*
*Sample HSPICE Deck
*
***************************************************


.TITLE 'IDS vs VGS for CNFET'


***************************************************
*For optimal accuracy, convergence, and runtime
***************************************************
.options POST
.options AUTOSTOP
.options INGOLD=2     DCON=1
.options GSHUNT=1e-12 RMIN=1e-15 
.options ABSTOL=1e-5  ABSVDC=1e-4 
.options RELTOL=1e-2  RELVDC=1e-2 
.options NUMDGT=4     PIVOT=13

.param   TEMP=27
***************************************************


***************************************************
*Include relevant model files
***************************************************
.lib 'CNFET.lib' CNFET
***************************************************


***************************************************
*Beginning of circuit and device definitions
***************************************************
*Supplies and voltage params:
.param Supply=0.9  	
.param Vg='Supply'
.param Vd='Supply'

*Some CNFET parameters:
.param Ccsd=0      CoupleRatio=0
.param m_cnt=1     Efo=0.6     
.param Wg=0        Cb=40e-12
.param Lg=32e-9    Lgef=100e-9
.param Vfn=0       Vfp=0
.param m=19        n=0        
.param Hox=4e-9    Kox=16 

***********************************************************************
* Define power supply
***********************************************************************
Vdd     Drain     Gnd     Vd
Vss     Source    Gnd     0
Vgg 	  Gate	Gnd	  Vg
Vsub    Sub       Gnd     0

***********************************************************************
* Main Circuits
***********************************************************************
* nFET
XCNT Drain Gate Source Sub NCNFET Lch=Lg  Lgeff='Lgef' Lss=32e-9  Ldd=32e-9  
+ Kgate='Kox' Tox='Hox' Csub='Cb' Vfbn='Vfn' Dout=0  Sout=0  Pitch=20e-9  n1=m  n2=n  tubes=3

* pFET
*XCNT Drain Gate Source Sub PCNFET Lch=Lg  Lgeff='Lgef' Lss=32e-9  Ldd=32e-9  
*+ Kgate='Kox' Tox='Hox' Csub='Cb' Vfbp='Vfp' Dout=0  Sout=0  Pitch=20e-9  n1=m  n2=n  tubes=3

* nFET uniform-tubes model
*XCNT Drain Gate Source Sub NCNFET_uniform Lch=Lg  Lgeff='Lgef' Lss=32e-9  Ldd=32e-9  
*+ Kgate='Kox' Tox='Hox' Csub='Cb' Vfbn='Vfn' Dout=0  Sout=0  Pitch=20e-9  n1=m  n2=n   CNTPos=1 tubes=3

* pFET uniform-tubes model
*XCNT Drain Gate Source Sub PCNFET_uniform Lch=Lg  Lgeff='Lgef' Lss=32e-9  Ldd=32e-9  
*+ Kgate='Kox' Tox='Hox' Csub='Cb' Vfbp='Vfp' Dout=0  Sout=0  Pitch=20e-9  n1=m  n2=n   CNTPOS=0 tubes=3

***********************************************************************
* Measurements
***********************************************************************
* test nFETs, Ids vs. Vgs

.DC      Vgg   START=0     STOP='Supply'   STEP='0.3*Supply' 
+ SWEEP  Vdd   START=0     STOP='Supply'   STEP='0.3*Supply'
.temp 100 150 200

* test pFETs, Ids vs. Vgs
*.DC      Vgg   START=0     STOP='-Supply'   STEP='-0.01*Supply' 
*+ SWEEP  Vdd   START=0     STOP='-Supply'   STEP='-0.1*Supply'

***********************************************************************

.print I(Vdd)

.end
this is the netlist where i change temp
can any one help me out.
 
Last edited by a moderator:

Re: effect of high temperature on cntfet

try for another model of cntfet.then u will get solution for it.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top