Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Helop With SMD capacitor

Status
Not open for further replies.
E

Electronics_chaitanya

Member level 5
Joined
Oct 27, 2010
Messages
91
Helped
7
Reputation
14
Reaction score
5
Trophy points
1,288
Location
India
Activity points
1,985
Dear all

Right now i am making inductive proximity detector.

I am using old tank capacitor 1nF 1206 (White color) i got it from old working proximity detector.

But when i place new capacitor with same value and voltage (Yellow color) in circuit it stopped working.

Can anyone help me with it ? What might be wrong with circuit ? If i again place old sample capacitor circuit start working again.


Regards
 

HI

One more question

Which type of capacitor to be used with proximity tank circuit? Ceramic type or Film type? I doubt about ceramic as they are not performing properly . Please guide me in this


Regards
 

You Can Read to get to Know Parameters associated with Capacitors:
+ **broken link removed**
+ Section 4: Technical Summary and Application Guidelines -AVX
+ GRM219R61H105KA73D - Murata Capacitor Characteristics
apart from Wikipedia about Ceramic Capacitors.

Ceramic Capacitor--{X5R,X7R} Capacitance Value Changes with
+ Applied Voltage e.g: upto 80% drop at Rated Voltage
+ Temperature Variation .
+ Time.
+ etc ...

If Your Get Parameters Right Ceramic Capacitors Will Work:).
 
Hi thanks for information.
A capacitor I am using is ceramic with dielectric NP0 which is most stable as per I know. Tolerance is 5% as of now.


Looking forward from all you guys.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top