Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

UCF file conversion from Spartan-6 to Virtex-5 XC5VLX20T ff323

Status
Not open for further replies.

qaziarbab

Junior Member level 1
Joined
Oct 9, 2017
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
104
Hi,

I have the following UCF file for Spartan-6 FPGA. Currently I am using Virtex-5 XC5VLX20T ff323 to implement my design. How can I convert the same file according to Virtex 5. If someone has already, please share.

Regards,
Qazi
View attachment mc8051_fpga_top.txt
 

A Spartan-6 is a different family, different package, different pinout part. There is no "magic" conversion between the devices. You pick new pins on the Virtex-5 that have the same functionality as the ones that were used on the Spartan-6. e.g. put the clk pin on a dedicated MRCC (multi-region clock capable) pin, use the pin that has a reset cicruit on the board for rst, etc.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top