Teja.p
Member level 2
Dear all..
thank u for u r support on my previous questions..
My application is ON/off a RELAY for 60 times by making one pin of the micro controller is high/low and counting the cycles(ON/OFF)..
In this condition while perform the task power is off..after power ON i want to continue from before the power is off..
for EXAMPLE
At 25 cycle power is off ..After power ON i want to continue from 25cyycle on-wards..
Now i am using PIC12F675 or 16F73 MICRO controller ..
is this possible ..(with using external supply for micro controller)
if it is possible...
please help meee
thank u for u r support on my previous questions..
My application is ON/off a RELAY for 60 times by making one pin of the micro controller is high/low and counting the cycles(ON/OFF)..
In this condition while perform the task power is off..after power ON i want to continue from before the power is off..
for EXAMPLE
At 25 cycle power is off ..After power ON i want to continue from 25cyycle on-wards..
Now i am using PIC12F675 or 16F73 MICRO controller ..
is this possible ..(with using external supply for micro controller)
if it is possible...
please help meee