Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Xilinx USB II platform cable driver centos 7.3/vivado 16.3

Status
Not open for further replies.

beginner_EDA

Full Member level 4
Joined
Aug 14, 2013
Messages
191
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
3,854
Xilinx usb II platform cable driver centos 7.3/vivado 16.3

hi,

[root@localhost ~]# cd /opt/Xilinx/Vivado/2016.3/data/xicom/cable_drivers/lin64/install_script/install_drivers
[root@localhost install_drivers]# ./install_drivers
INFO: Installing cable drivers.
INFO: Script name = ./install_drivers
INFO: HostName = localhost.localdomain
INFO: Current working dir = /opt/Xilinx/Vivado/2016.3/data/xicom/cable_drivers/lin64/install_script/install_drivers
INFO: Kernel version = 3.10.0-693.el7.x86_64.
INFO: Arch = x86_64.
USB udev file exists and will not be updated.
--File /etc/udev/rules.d/52-xilinx-pcusb.rules exists.
--File /etc/udev/rules.d/52-xilinx-pcusb.rules version = 0002
--File 52-xilinx-pcusb.rules exists.
--File 52-xilinx-pcusb.rules version = 0002
--File 52-xilinx-pcusb.rules is already updated.

INFO: Digilent Return code = 0
INFO: Xilinx Return code = 0
INFO: Return code = 0
INFO: Driver installation successful.
CRITICAL WARNING: Cable(s) on the system must be unplugged then plugged back in order for the driver scripts to update the cables.
[root@localhost install_drivers]#

Although driver installation successful it dioesn't work / not show even power. Don't know what's wrong. I am new to linux. Any help?

with lsusb it shown already though:
[root@localhost ~]# lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0461:4e04 Primax Electronics, Ltd
Bus 001 Device 010: ID 03fd:0013 Xilinx, Inc.
Bus 001 Device 002: ID 17ef:6019 Lenovo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@localhost ~]#
 
Last edited:

Re: xilinx usb II platform cable driver centos 7.3/vivado 16.3

Looks like you got a warning there. Did you take care of that?
And what do you mean "not show even power"?. None of the lights on the cable illuminate? If so, that's got nothing to do with the driver, could be a bad cable.
 

Re: xilinx usb II platform cable driver centos 7.3/vivado 16.3

@barry
yes, I care for the warning.
not power I mean is Programmer-LED doesn't glow neither yellow nor green.
 

Re: xilinx usb II platform cable driver centos 7.3/vivado 16.3

So you've got a bad USB port or a bad cable. I believe the led should glow just plugging the cable in.
 

Re: xilinx usb II platform cable driver centos 7.3/vivado 16.3

@barry
the same cable programmer-USB combnation works in windows 7.
 

Re: Xilinx usb II platform cable driver centos 7.3/vivado 16.3

I'm not sure,but I think as long as 5 volts is present on your usb port, the led should light.
 

Re: Xilinx usb II platform cable driver centos 7.3/vivado 16.3

The 5V to a USB port can be controlled by SW, so the Linux driver for the Xilinx USB cable isn't enabling the 5V.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top