+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Newbie level 1
    Points: 33, Level: 1

    Join Date
    Sep 2017
    Posts
    0
    Helped
    0 / 0
    Points
    33
    Level
    1

    Porting xenomai rtos to arm cortex m3

    Hi friends,


    I am doing a project on Porting XENOMAI RTOS to cortex m3 architecture(LPC1768board), but i am new to this subject and i do not know how to start .

    if anybody did a project or currently doing similar project please guide me how to start .
    Thank you in advance....

    •   Alt9th October 2017, 07:07

      advertising

        
       

  2. #2
    Junior Member level 1
    Points: 2,288, Level: 11

    Join Date
    Oct 2005
    Location
    Mexico
    Posts
    15
    Helped
    4 / 4
    Points
    2,288
    Level
    11

    Re: Porting xenomai rtos to arm cortex m3

    According to the XENOMAI RTOS webpage, the intention is to give to real time capabilities to the Linux Kernel.

    If you want something similar to Linux but for your board give a try to NuttX

    http://nuttx.org/



    •   Alt10th October 2017, 03:28

      advertising

        
       

  3. #3
    Administrator
    Points: 68,974, Level: 64
    Achievements:
    Created Album pictures Created Blog entry 7 years registered
    bigdogguru's Avatar
    Join Date
    Mar 2010
    Location
    Southwest, USA
    Posts
    9,812
    Helped
    2350 / 2350
    Points
    68,974
    Level
    64
    Blog Entries
    4

    Re: Porting xenomai rtos to arm cortex m3

    I do not believe an ARM Cortex-M3 device like the LPC1768 has the resources to support a port of the Linux 3.0 kernel, which is required for Xenomai RTOS.

    For a list of the supported hardware:

    Supported Hardware

    BigDog
    The Edge... there is no honest way to explain it, because the only people who really know where it is are the ones who have gone over.
    -- Hunter S. Thompson



--[[ ]]--