Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Made up wire/crimp assemblies?

Status
Not open for further replies.
T

treez

Guest
Hello,
We are using the side entry S6B-XH-SM4-TB connectors to connect 6 wires from one board to another.
S6B-XH-SM4-TB datasheet:
https://www.farnell.com/datasheets/...68.614381281.1504556097-1679746183.1489787856

We will use any wire from 22-26 AWG.
Do you know if there are any made up assemblies for sale of the wires with the crimps on each end?(say 7cm to 20cm long)

The crimps are part number SXH-001T-P0.6
The receptacle which houses the crimps is part number XHP-6
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top