Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

hspice ".meas dc" command for a specific temperature

Status
Not open for further replies.

mpig09

Full Member level 4
Joined
Aug 26, 2005
Messages
232
Helped
8
Reputation
16
Reaction score
2
Trophy points
1,298
Location
Taipei
Activity points
2,810
Hi all:

I sweep temperature from -40C ~ 125C, and I want to know
the power current when Temp = 50C,

I have reference the following post :
https://www.edaboard.com/threads/181696/

and I try the meas command :
.dc sweep temp -40 125 5

.meas dc IVDD I(VDD) AT temp =50

==>the result is show syntax error.

Could you know where is wrong?

Thanks for your help.
mpig
 

Hi erikl:

Thank you for receiving your reply.

I change the command to :
.meas dc IAVDD find I(AVDD) AT temp = 50

The hspice shows "syntax error" too.

mpig
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top