Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

altium errors (net xxx only have one pin)

Status
Not open for further replies.
A

arr_baobao

Full Member level 2
Joined
Nov 1, 2011
Messages
134
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
2,316
altium error ( net xxx only have one pin)

Hi all,

I have encounter this error in altium pcb design when i trying to compile my project.
what does all the errors means? and how to solved this error?
Is this a fatal error or i can just ignore and proceed to PCB layout.
thanks.

altium error.JPG
 

Re: altium error ( net xxx only have one pin)

It looks like you've got pins with nothing connected to them. Only you can tell if that's correct or not.
 

Re: altium error ( net xxx only have one pin)

These are single pin nets, means that these conncetions starts from U1 pins but donot connect to any other pin.

If these are deliberate then you can ignore them.
 

Re: altium error ( net xxx only have one pin)

Altium provides a specific directive which tells DRC tool to ignore them when compiling project. Just click on menu : Place>>Directive>>Generic NoERC and put it at the unused pins.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top