Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

The EDA design tool for GaAs substrate.

Status
Not open for further replies.

hg81

Newbie level 3
Joined
Feb 26, 2017
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
31
The EDA design tool for GaAs substrate.

I know there is a EDA tool called dw-2000, please let me know if there are any other tools except this dw-2000.

Many thanks for your reply.
 

Can you explain - what you mean - "EDA design tool for GaAs substrate"?

There are EDA design tools, for layout, schematic capture, LVS, DRC, parasitic extraction, circuit simulation, IR/EM analysis, etc. etc.
Most of them are commercial, but some of them - free.
What exactly are you interested in?
 

The EDA design tool for GaAs substrate.

I know there is a EDA tool called dw-2000, please let me know if there are any other tools except this dw-2000.

Many thanks for your reply.

So confusing. dw-2000 is/was a layout suite, it has nothing to do with substrate type.
 

The place to start is the eventual foundry for this
GaAs "whatzit". They will be pleased to tell you the
design kits they offer and what platforms they are
built for. Anything that is not supported this way is
some combination of excess effort and increased
odds of "fail". With no support to be expected, since
you didn't get on the right bus and it's all on you.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top