Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

current source clarification

Status
Not open for further replies.

INGLE.SHUBHAM

Member level 1
Joined
Nov 18, 2016
Messages
34
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
303
if you have a current source of 500ma and a resistor of 1K in series with it then what would the current across the other end of the resistor.
please elaborate the answer.
 

The current will always be 500mA. Whatever resistance is. If the loop is open, the voltage will be unlimited high. If loop is closed, voltage will be 500mA x 1k = 500V.
 

Hi,

....and the current at the pins of every two_pin_device will always be equal.
The current that goes IN needs to come OUT.

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top