Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Motor driver signal - H bridge?

Status
Not open for further replies.

damian-cc

Newbie level 1
Joined
Jul 10, 2017
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
12
Hi,

noob question, but I don't know where to start.

I have a motor which requires such a trapezoid, high voltage signal:
driver_signal.jpg
The goal is to build a driver based on Atmega microcontroller. Unforunatelly I don't have too much experience with circuit designs. I talked a bit with my friend and he told me that I could try to use H-bridge based on IR2101 and power MOSFETs.

What do you think? Do you have any other suggestions, hints?
 

Hi Damian-CC,

Is it create the trapeziod pulse is a task, or you only need to make the motor run? Please share motor technical spec.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top