arve9066
Member level 2
I am using the Murata OKL-T/1-W12 to produce 1.7V from a 12V battery. This 1.7V has to power a thermoelectric cooler of resistance around 2.5 ohms about 700mA load current. Although I see an open circuit voltage ( even with 1Kohm load as well) of 1.7V, when I connect the thermoelectric cooler I see only 0 V at the output. I think the output short protection gets activated when it sees such a low resistance as load although the device is supposed to provide up to 1A current. Is there anything I could do to get the device working somehow bypassing the output current protection?