Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Connecting vdd and vss

Status
Not open for further replies.

em00guy

Junior Member level 1
Joined
Apr 10, 2005
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,414
eagle vdd vss

Im making a schematic in eagle using a 2-input quad NOR IC. When atempting to create a board I find that the implicit vdd and vss power pins are not respectivley connected to V+ and GND. I thought eagle does this automatically. Please help. Thanks.
 

you need create the vdd and vss yourself for the board.
 

Yeah i figured that out. I just invoked the vdd and vss pins and connected them to v+ and gnd respectively. However running erc gives me 2 warnings that vdd and vss are connecteed to v+ and gnd respectively. What is that about?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top