Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

transformer in proteus simulation ISIS

Status
Not open for further replies.

Akshaydpal

Member level 1
Joined
Feb 23, 2017
Messages
35
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
284
HI,

How to use tranformer in proteus ?? i want to use a 12/220v transformer @50hz but it is asking for primary inductance seconary nductance etc how to get those values.
 

Normally primary inductance is not considering for 50Hz power transformers, Primary inductance is important in high frequency transformers like SMPS transformers. For simulation you can give some approximate value (1H to 25H).
For calculation
Calculate primary impedance , Z = V/I
From impedance find out inductance
Z= √ [R^2+ (XL-XC)^2]
XL=2πfL
XC=1/2πfC
 
thanx smijesh ,

so basically in proteus the only thing which matters is k. ??
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top