Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

share encoder pulses between two plc?

Status
Not open for further replies.
farhang_760

farhang_760

Newbie level 6
Joined
Mar 8, 2015
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
107
Hi,
I want to share a encoder (open collector)pulse between two plc. that means the two sensor A and B convert into A1,B1 and A2,B2, that A1=A2 and B1=B2.
please help me how can i o this? could i use 74hc14 to create two separate pulses from A and B?
thanks.
 

Hi,

It´s not clear what you want to

What encoder?
What and how many signals? (frequency, waveform, voltages...)
What PLC input? (what voltage levels?)

***

Generally:
If you have one signal output (source): you may connect it to several signal inputs .. without extra effort.
But in detail it depends on the devices involved. All informations should be given in their datasheets.

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top