Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

The Troubles of NRF24L01 occurred when receiving

Status
Not open for further replies.

shay1995

Newbie level 3
Joined
Mar 4, 2017
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
55
Hello~
I would like to ask you some suggestions about NRF24L01 .My situations:
I have invoked the transmitting and there is set to ban ACK when send the data every one seconds.However,there are some wrongs. It can just receive data once after powering.The IRQ interrupts once while the register value is :

the first time: STATUS=0X40;FIFO_STATUS=0X10
The second time:STATUS=0X00;FIFO_STATUS=0X12
Then it always be:STATUS=0X00;FIFO_STATUS=0X12
Can you help me?
Thank you in advance.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top