Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Silvaco Mixedmode cylindrical problem

Status
Not open for further replies.

wsflai

Newbie level 1
Joined
Apr 19, 2017
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
16
Hi,

I am running Silvaco Mixedmode with a cylindrical atlas device. In my SPICE-like circuit description, I have already used the cylindrical options:

.options CYLINDR

However, when I run the simulation, the following error occurred:

Error: Electrode # 1, SOURCE , has zero thickness.
A DEVICE3D electrode must have an associated thickness.

The SOURCE electrode is defined in Atlas as:

ELECTRODE NUMBER=1 NAME=SOURCE R.MIN=7 R.MAX=8 A.MIN=40 A.MAX=50 Z.MIN=-0.11 Z.MAX=0

What could be the problem? Thank you.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top