Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

rectangular array antenna 2x8

Status
Not open for further replies.

Yunierys1994

Newbie level 4
Joined
Mar 22, 2017
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
51
Hello all

I´m designing a patch array 2x8 in HFSS, for 60GHz, but i do not see a better result when i compare with the simple element.

Sin título.jpg

this is a picture of my design, please tell me if i have to do something in HFSS in order to get better results. My simple element has a gain=7.92dB and my array gain = 8.28dB.
I´ll be waiting for your advise.

thanks,
regards.
Yunierys.
 

Are you exciting all of the ports simultaneously? HFSS->Fields->Edit Sources.

i'm exciting all ports, but i did not know about HFSS->Fields->Edit Sources., what should i do in there?

Untitled.png

Please help me, i do not know what else to do, i think that the softwere do not see my design as a array.I'm using driven modal.

Thanks
Regards.

Yunierys
 

You define the magnitude and phase of the excitation of each port through Edit Sources.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top